As above drawing, disconnect the connector by SCREW DRIVER from the direction (A). / Do not disconnect from direction (B) because it is possibility to damage the parts located by the connector. / 5. REMOVAL OF THE MECHANISM UNIT
Remove Remove Remove 3 Screws (G) 2 Screws (H) Screw ( I )
NOTE :
Keep pressing 2 stoppers on the Cassette Holder Plate and press the Cassette Holder Plate to the rear. /
[ CAUTION -Mounting the Mechanism unit to Main C.B.A.]
A. When assembling, insert the Cylinder Flexible card to the Connector (P3502) carefully, to avoid any damage. B. Be sure to tighten the Screw ( I ), otherwise, S/N ration may become worse.
Fig. D7-1
