Wind up the tape to the point where recording will start. Note that recording will be completed on one side of the tape only.
1 Press the TAPE button. 2 Insert the original tape into deck 1 and the tape to be recorded on into deck 2.
Insert each tape with the side to be played back or recorded first facing the foreground.
3 Press the DOLBY NR button to turn off the Dolby NR. 00 NR on the display goes out. 4 Press the TAPE/DECK 1. 5 Press the q REC/REC recording, 1/2 button to select deck MUTE button to start
Playing and recording start simultaneously. To stop dubbing Press the s button. To set the Dolby NR when playing back the dubbed tape Press the DOLBY NR button and turn Dolby NR on or off to match the original tape.
3
DOLBY NR
7!?
To erase a recording Make sure the microphone is not connected to this unit. 1 Insert the tape to be erased into deck 2 and press the TAPE/ DECK 1/2 button to display TAPE 2. 2 Wind up the tape to the point where the erasure is to be started. 3 Set the reverse mode by pressing the REV MODE button. 4 Press the q REC/REC MUTE button to start the erasure.