W;nd up the tape to the point where recording will start. Note that recording will be completed on one side of the tape only.
1 Press the TAPE button. 2 Insert the original tape into deck 1 and the tape to be recorded on into deck 2.
Insert each tape with the side to be played back or recorded first facing the foreground.
3 Press the DOLBY NR button to turn off the Dolby NR. OUNR on the displaygoesout. 4 Press the TAPE/DECK 1, 5 Press the q REC/REC recording. 1/2 button to select deck MUTE button to start
Playing and recording start simultaneously.
To stop dubbing Pressthe s button.
To set the Dolby NR when playing back the dubbed tape Press the DOLBY NR button and turn Dolby NR on or off to match the original tape.
To erase a recording
Make sure the micro~hone is not connected to this unit. 1 Insert the tape to be erased into deck 2 and press the TAPE/ DECK 1/2 button to display �TAPE 2�. 2 Wind up the tape to the point where the erasure is to be started. 3 Set the reverse mode by pressing the REV MODE button. 4 Press the q REC/REC MUTE button to start the erasure.
