6. COMPONENT TEST PROCEDURE
CAUTION [NEW. H.V.] 1. High voltage is present at the high voltage terminal of the High Voltage Inverter (U) including aluminum heat sink during any cook cycle. 2. It is neither necessary nor advisable to attempt measurement of the high voltage. 3. Before touching any oven components, or wiring, always unplug the oven from its power source and discharge the high voltage capacitors.
6.1. Primary latch switch (Secondary latch switch and power relay B) interlocks. 1. Unplug the lead connectors to Power Relay B and verify continuity of the power relay B 1-2 terminals. 2. Unplug lead connectors to Primary Latch Switch and Secondary Latch Switch. 3. Test the continuity of switches at door opened and closed positions with ohm meter (low scale). / Normal continuity readings should be as follows.
21