13) Attach the FL cam gear so that the marking on the FL cam gear is aligned to the center of the worm wheel.
FL cam gear The shaded portion should be coated with grease Marking Worm wheel
Fig-2-6-8 Joint gear 1
Two holes Fig-2-6-11
14) To attach the joint gear 2, align the marking on the joint gear 1 with that on the cam slider.
Joint gear 1
Align the markings
The shaded portion should be coated with grease
Joint gear 2
Fig-2-6-9 FL cam gear (Playback only machines) 12) To attach the joint gear 1, attach it so that cutout of the gear is directed toward the FL cam gear.
Align the markings Fig-2-6-12
Cam slider
15) After parts are replaced, assemble the mechanism by reversing the disassembling procedure.