Combining tracks (Combine)
When you record with analog (line) input, unnecessary track marks may be recorded where recording level is low. You can erase a track mark to combine the tracks before and after the track mark. The track numbers will change as follows.
Notes
2
Find the track mark by pressing the 5way control key towards . slightly. For example, to erase the third track mark, find the beginning of the third track. �00:00� appears in the display. �MARK� appears in the display for a few seconds. Press T MARK to erase the mark. �MARK OFF� appears in the display. The track mark is erased and the two tracks are combined.
3
� You cannot erase a track mark on a track that
has been transferred from your computer.
� You cannot erase a track mark on a track that
has been recorded in Hi-MD mode using the MD Simple Burner software. � You cannot combine tracks recorded in different recording mode.
z
When a track mark is erased when you combine two tracks, the recording date and title of the second track changes to those of the first track. Note
1
2
3
4
Erase a track mark
1
2
3
Track numbers decrease T MARK
When you erase a track mark between the two consecutive tracks that are assigned into different groups, the second track is re-assigned into the group containing the first track. In addition, if you combine a track that is assigned to a group with a track that is not assigned to a group (two consecutive tracks), the second track takes the same registration setting as the first track.
X
5-way control key (.)
1
While playing the track with the track mark you want to erase, press X to pause.
