|
No hay comentarios de productos.
3 Select the recording mode.
1
Slide REC MODE to STEREO. When you set the REC MODE switch to MONO, the recording will be in monaural, but the recording time will be two times longer than in stereo. Make sure not to switch the recording mode while recording. REC MODE
4 Record an MD.
built-in microphones xSTOP Connect firmly to i REC indicator zREC x to i Connect firmly
1
Press zREC. �REC� and �STEREO� appears, REC indicator lights up, and then recording starts. You can monitor the recording conditions, such as the recording position, through the display or the REC indicator (page 20). If the disc is blank, the recording starts from the beginning. If the disc is partially recorded, the recording automatically starts from the end of the existing material.
To stop recording, press xSTOP.
After you press the xSTOP button, the recorder will automatically turn off in about 30 seconds.
To monitor the sound during recording.
Connect the supplied headphones/earphones with remote control to the i jack. You can adjust the volume by turning the VOL control. This adjustment does not affect the recording level since the level is adjusted automatically.
To Record partway through the previous recording
Press NPLAY, >CUE/AMS or .REVIEW/AMS to find the beginning of the material to be recorded, press XPAUSE, and then press zREC. The recorder changes to recording pause. Press XPAUSE again to start recording. XPAUSE while recording. Press XPAUSE again to resume recording.
Pause1)
9-GB
|
