CA-MXS6MDR SP-MXS6MD
<Traverse mechanism assembly> Removing the Insulators (See Fig.16)
1. Disengage the four insulators from the notches of the traverse mechanism chassis.
Pickup unit Insulators
Insulators Traverse machanism chassis
Fig.16
Removing the pickup unit (See Fig.17)
1. Turn over the traverse mechanism assembly and remove the screw J attaching the shaft holder (F). 2. Move the shaft inward and remove it from the shaft holder (R). 3. Detach the shaft side of the pickup unit upward and release the joint h with the pickup guide. Then remove the pickup unit with the shaft.
Joint h
Pickup guide
Pickup unit
Shaft holder (R)
Shaft holder (F)
J
Fig.17
K
Removing the pickup (See Fig.18)
1. Draw out the shaft from the pickup. 2. Remove the two screws K attaching the rack spring.
Rack spring Pickup
