JVC MX-KC2UY
Manual de Usuario

Using the Timers

English

Using the Unit You can set the time in the same way as for setting the Daily Timer.

8

1 2

Insert a blank or erasable tape into the Deck B and wind past the tape leader. Press the CLOCK TIMER button until �ON TIME� immediately after �REC� appears on the display.
Each time you press the button, the display changes as follows: DAILY = ON TIME = REC = ON TIME* = Clock setting display = Canceled = (back to the beginning)
*: This item should be selected for the REC Timer setting.

Press the STANDBY/ON button to turn off the System, if necessary.

The Timer indicator ( ) and �REC� indicator are lit on the display, showing that the REC Timer is set to on. To confirm / change the timer setting, repeat the setting procedure from the beginning. When the timer ON-time comes: � When the timer ON-time comes, the System automatically turns on. The station you have set is played. The �REC� indicator lights up and the Timer indicator ( ) and the Tape Indicator (3) blinks during timer operation. To stop timer recording, press the 7 button. � When the timer OFF-time comes, the System automatically turns off.

Then, the System enters ON-time setting mode. The current ON time appears on the display and the hour digits, �REC� indicator blinks and the Timer indicator ( ) lights up.

� If the System is already on when the timer ON-time comes, the REC Timer does not work.

Turning the REC (Recording) Timer On and Off
Once you have set the REC Timer to record a source, the timer setting is stored in memory. So, though the REC Timer turns off once it is used, you can recall it at any time.

3

Setting the ON time you want the System to turn on.

To cancel the REC Timer temporarily:

1. Press the 4 or ¢ button to set the hour, then press the SET/DISPLAY button. 2. Press the 4 or ¢ button to set the minute, then press the SET/DISPLAY button. �OFF TIME� appears and then the System enters OFF-time setting mode. The current OFF time appears on the display, and the hour digits blink.

1

Press the CLOCK TIMER button on the Unit repeatedly until �REC� appears on the display.
The Timer indicator ( blinks on the display. ) lights up and the �REC� indicator

2

Press the CANCEL/DEMO button on the Unit.
�OFF� appears and both the Timer indicator ( �REC� indicator go out. ) and the

4

Setting the OFF time you want the System to turn off.
1. Press the 4 or ¢ button to set the hour, then press the SET/DISPLAY button. 2. Press the 4 or ¢ button to set the minute, then press the SET/DISPLAY button. The System enters Preset Station Entering mode.

To activate the cancelled REC Timer:

1

Press the CLOCK TIMER button on the Unit repeatedly until �REC� appears on the display.
The Timer indicator ( blinks on the display. ) lights up and the �REC� indicator

5

Select the preset station for recording.
1. Press the 4 or ¢ button to set the band (TUNER FM or TUNER AM), then press the SET/DISPLAY button. 2. Press the 4 or ¢ button to set the preset number, then press the SET/DISPLAY button.

2

Press the SET/DISPLAY button on the Unit.
�ON� appears on the display. The Timer indicator ( ) and the �REC� indicator remain lit, and the display returns to the original display.

6

Setting the volume level.
� If the System is unplugged, or a power failure occurs, the timer setting will be lost in a few days. You will need to reset the clock first, then the timer.

Press the ¢ or 4 button to select the volume level. MIN, 1-26, or MAX: When the timer is turned on, the Volume will be automatically faded into the selected volume level. � When the volume level is set to MIN, no sound comes out of the speakers.

7

Press the SET/DISPLAY button.
The timer setting is completed, the display returns to the display before you set the Timer.

23