JVC MX-KA7UM
Manual de Usuario

Using the Timers

Setting the SLEEP Timer
Use the Sleep Timer to turn the System off after a certain number of minutes when it is playing. By setting the Sleep Timer, you can fall asleep to music and know that your System will turn off by itself rather than play all night. � You can only set the Sleep Timer when the System is on.
Using the Remote Control

Timer Priority
Since each timer can be set independently, you may wonder what happens if the settings overlap. Here are the priorities for each timer: � The REC Timer always has priority. This means that: � If other timer is set to come on during a time when the REC Timer is operating, the other timer just won�t come on at all, so you will always get the entire program on a tape. � If the REC Timer is set to come on while other timer is operating, the other timer will turn off just before the REC Timer is set to turn on, and the REC Timer will then take over. � If the SLEEP Timer is set while DAILY Timer is operating, the DAILY Timer settings are cancelled. However, if DAILY Timer is set to come on while the SLEEP Timer is operating, the SLEEP Timer setting will be cancelled and the System will use the settings from the DAILY Timer.

1 2

During playback a source, press the SLEEP button.
The �SLEEP� indicator starts blinking on the display.

Each time you press the SLEEP button, the time length changes as follows: 10 = 20 = 30 = 60 = 90 = 120 = Cancelled = (back to the beginning)

Set the length of time you want the source to play before shutting off.

Example 1
Setting ON REC Timer OFF SLEEP Timer OFF

3

Wait for 5 seconds.
The �SLEEP� indicator stops blinking and remains lit, and the display returns to the original one before setting the Sleep Timer. The System is now set to turn off after the number of minutes you have set.
REC Timer

10:00PM

10:30PM 11:00PM

Operation ON OFF

To Confirm the Sleep Time: When the SLEEP button on the Remote Control is pressed, the remaining sleep time is displayed. Wait until the display returns to the original display. To Cancel the SLEEP Timer Setting: Press the SLEEP button on the Remote Control until the �SLEEP� indicator goes out on the display. � Turning off the System also cancels the SLEEP Timer.

SLEEP Timer

10:00PM

10:30PM

The REC Timer has priority.

Example 2
Setting ON OFF ON OFF

� When the SLEEP button is used without setting the clock, �CLOCK ADJUST� appears on the display. You need to set the clock beforehand.

REC Timer DAILY Timer

9:30PM 10:00PM 10:30PM 11:00PM

Operation ON REC Timer DAILY Timer OFF

9:30PM

10:30PM

The REC Timer has priority.

24

English