|
|
|
Usuarios conectados
Actualmente hay 6001 visitantes y
1 usuarios online. |
|
Productos
|
|
Información
|
|
Destacado
|
|
|
 |
|
|
No hay comentarios de productos.
Using the CD Player
Example of indication:
When CD door has ejected once and then CD-1 is pressed. (DISC1 is selected) Shows that this disc number is selected.
t When you use an 8 cm (3'') CD, place it on the inner circle of the tray. t You can load CDs while listening to the other source. t When power is turned off with the tray opened, the tray is automatically closed. t If the CD cannot be read correctly (because it is scratched, for example), � 0 0:00� appears on the display.
1
2
3
Shows that the disc is rotating.
To Unload CDs
Take out the CD as shown below.
One Touch Play
The power comes on, and operations are done automatically. t By pressing the CD 6 button, the System will come on, and if a CD is loaded for the disc number that was lastly selected, it will start playing from the first track. t By pressing the CD1-CD3 button, the System will come on, and if a CD is already loaded for the selected disc number, it will start play from the first track. � If no CD is loaded for the selected disc number, the next disc number will be automatically selected.
1 2
While the CD Player is stopped, press the CD Open/Close 0 button on the Unit to open the tray. Remove the CD, then press the DISC SKIP button on the Unit.
The tray turns for the next CD.
3 4
Repeat step 2 to remove all the CDs. Press the CD Open/Close Unit to close the tray.
0 button on the
To Load CDs
1 2
Press the CD Open/Close Unit to open the tray.
t You can remove CDs while listening to the other source.
0 button on the
Place a CD, with its label side up, onto the tray.
Be sure that the CD is securely seated on the disc tray.
With the label side up
� You can also remove the CDs during playback. However, in this case, you can only remove the CDs that are not being played back.
3 4 5
Press the DISC SKIP button on the Unit and place the next CD.
When you press the button, the tray turns for the next CD.
Repeat step 3 for the last CD. Press the CD Open/Close 0 button on the Unit.
The tray is closed.
12
English
|
|
|
> |
|
