|
No hay comentarios de productos.
3.1.8 Removing the center chassis assembly (See Fig.16) � Remove the metal cover, tuner, video board and rear panel. (1) From the top side of the main body, disconnect the card wires from the connectors (CN11, CN511, CN513) on the main body. Reference: When reassembly, pass the card wire through the section f of the main board before connecting the card wire to the connector CN11. (2) Remove the two screws P attaching the center chassis assembly. (3) Take out the center chassis assembly with the DVD mechanism assembly from the main body.
Main board CN511 Card wire CN513 CN11 f
Card wires
P
Center chassis assembly DVD mechanism assembly
Fig.16 3.1.9 Removing the transformer board (See Fig.17) � Remove the metal cover, tuner, video board, rear panel and center chassis assembly. (1) From the top side of the main body, disconnect the wires from the connectors (CN119, CN250) on the transformer board. (2) Disconnect the parallel wire from the connector CN103 on the transformer board. (3) Remove the four screws Q attaching the transformer board and take out the transformer board from the main board.
Q
Power cord
Q
CN250
Q
Fig.17
CN103 CN119 Parallel wire Transformer board
1-14 (No.MB385)
|
