3.1.5 Removing the rear panel (See Figs.8 to 11) � Prior to performing the following procedures, remove the metal cover. (1) From the back side of the main body, remove the screw J attaching the rear cover. (See Fig.10.) (2) Release the sections c and remove the rear cover from the rear panel. (See Fig.10.) (3) Remove the two screws K and eighteen screws L attaching the rear panel. (See Fig.11.) (4) Remove the screw L� attaching the rear panel.(See Fig.11.) [US/UX/UN version only] Reference: Remove the tuner and video board as required. (See Figs.8 and 9.) (5) From the both sides of the main body, release the sections d of the center chassis in the direction of the arrow and release the joints e attaching the rear panel to the bottom chassis. (See Fig. 11.)
