Time Search
You can move to a particular point by specifying the elapsed playing time from the beginning. 1 While playing (without PBC for SVCD/VCD), display the on-screen bar with the pull-down menu. � Except for DVD: Time Search can be used before starting playback. 2 Select . 3 Display the pop-up window.
DVD-VIDEO 8.5Mbps TITLE 14 2CHAP 233 TOTAL 1:25:58 TITLE CHAP TOTAL 1:01:58
To cancel Repeat Play, select �OFF� in step 4. To erase the on-screen bar
TIME TIME
OFF OFF
CHAP.
TIME _ : _ _ : _ _
1/3 1/3
1/ 3 1/3
1/1 1/3
A-B Repeat
1 While playing, display the on-screen bar with the pull-down menu. 2 Select OFF . 3 Display the pop-up window.
DVD-VIDEO 8.5Mbps TITLE 14 2CHAP 233 TOTAL 1:25:58 TITLE CHAP TOTAL 1:01:58
4 Enter the time. You can specify the time in hours/minutes/seconds. Examples: To move to a point of 1 (hours): 02 (minutes): 00 (seconds), press 1, 0, 2, 0, then 0. To move to a point of 54 (minutes): 00 (seconds), press 0, 5, 4, 0, then 0. � It is always required to enter the hour digit (even �0� hour), but it is not required to enter trailing zeros (the last two digits in the examples above). � To correct a misentry, press cursor 2 to erase the last entry. 5 Finish the setting. The System starts playing from the specified time.
TITLE 14 2CH TITLE C
TIME TIME
OFF OFF
OFF
CHAP.
1/3
1/3
1/ 3
1/3
1/1
1/3
4 Select �A-B�.
DVD-VIDEO 8.5Mbps TITLE 14 2CHAP 233 TOTAL 1:25:58 TITLE CHAP TOTAL 1:01:58
TIME TIME
OFF OFF A�B
CHAP.
1/3 1/3
1/ 3 1/3
1/1 1/3
5 Select the start point (A).
DVD-VIDEO 8.5Mbps
TIME TIME
AOFF
CHAP.
1/3 1/3
� Before pressing ENTER, you can search for the end point using ¡. 6 Select the end point (B). A-B Repeat starts. The selected portion plays repeatedly.
