No hay comentarios de productos.
MX-J570V/MX-J680V <Rear panel assembly> Removing the tuner board (See Fig.21 and 22)
Prior to performing the following procedure, remove the metal cover and CD changer mechanism assembly. 1. Remove the two plastic rivets attaching the joint board, and remove the joint board. 2. Disconnect the card wire from connector CN1 on the tuner board. 3. Remove the two screws Y attaching the tuner board on the back of the body.
CN912 CN315 CN712 Joint board Plastic rivets CN870 CN1 Tuner board Rear panel CN871
CN612
Z
Input / output board
CN711
Fig.21
Removing the input / output board (See Fig.21 and 22)
Prior to performing the following procedure, remove the metal cover and CD changer mechanism assembly. 1. Remove the two plastic rivets attaching the joint board, and remove the joint board. 2. Disconnect the card wire from connector CN315 on the input / output board. 3. Disconnect the harness from connector CN912 on the input / output board. 4. Remove the screw Z attaching the input / output board on the lower side of the body. 5. Disconnect connector CN612, CN870, CN871, CN711 and CN712 on the input / output board and pulling out them outward. Remove the input / output board from the body.
Rear panel
Y
G
E
Fig.22
1-13
|