< Rear Panel Assembly >
Prior to performing the following procedure, remove the metal cover and the CD changer mechanism assembly. The following procedure can be performed even if the front panel assembly is attached.
Rear panel
S
T
Removing the Rear Cover (See Fig.18)
1. Remove the two Q screws attaching the rear cover on the back of the body.
Q S S S
Q
Removing the Rear Panel (See Fig.18 to 21)
Prior to performing the following procedure, remove the rear cover. 1. Remove the four R screws attaching the heat sink and the rear panel. 2. Remove the ten S screws attaching the rear panel. 3. Remove the two T screws attaching the voltage selector and the rear panel. (Only Ver.U type) 4. Release the two joints(d) and (e) on the lower part of the rear panel using a screwdriver, and remove the rear panel toward the rear side.
