MX-J270V Removing the rear cover, the rear panel, the voltage selector and the video board (See Fig.12 to 15)
Prior to performing the following procedures, remove the metal cover and the CD changer mechanism assembly. It is not necessary to remove the front panel assembly. 1. Remove the two screws F and the rear cover on the back of the body. 2. Remove the four screws G and the seven screws H attaching the main board and the heat sink to the rear panel. 3. Remove the screw I attaching the rear panel to the chassis base. 4. Remove the two screws J attaching the rear panel to the voltage selector. 5. Remove the two screws K attaching the rear panel to the video board. 6. Release the lower two joints f and g on both sides of the rear panel using a screwdriver and detach the rear panel backwards.
Rear panel
