|
|
|
Usuarios conectados
Actualmente hay 4431 visitantes online. |
|
Productos
|
|
Información
|
|
Destacado
|
|
|
 |
|
|
No hay comentarios de productos.
Common Operations
Turning On or Off the Power
To turn on the unit, press STANDBY/ON (or on the unit) so that the STANDBY lamp goes off.
Continued
3 Press ¢ or 4 to
adjust the minute, then press SET/RESUME.
To turn off the unit (on standby), press STANDBY/ON (or on the unit) again so that the STANDBY lamp lights up. A little power is always consumed even while the unit is on standby. To switch off the power supply completely, unplug the AC power cord from the AC outlet.
To check the clock time
Press DISPLAY while playing any source. � To return to the source indication, press DISPLAY again.
While the time indication appears on the display If you press a button or turn a control, the time indication returns to the source indication.
When you unplug the AC power cord or if a power failure occurs The clock is reset to �0:00� right away, while the tuner preset stations (see page 13) will be erased in a few days.
To adjust the clock again
1 Press CLOCK/TIMER repeatedly until �CLOCK� is selected. � Each time you press the button, the clock/ timer setting modes change as follows:
DAILY
Canceled
Setting the Clock
Before operating the unit any further, first set the clock built in this unit. You can set the clock whether the unit is on or off.
ON TIME CLOCK
2 Press SET/RESUME. 3 Perform steps 2 and 3 of �Setting the Clock.�
When you unplug the AC power cord or if a power failure occurs The clock loses the setting and is reset to �0:00.� You need to set the clock again.
On the remote control ONLY:
1 Press CLOCK/TIMER.
Selecting the Sources
The hour digits start flashing on the display.
2 Press ¢ or 4 to adjust
the hour, then press SET/ RESUME.
To listen to the radio, press FM/AM. (See page 13.) To play back CDs, press CD 6 or CD1, CD2, CD3. (See pages 14 � 19.) To select the external equipment as the source, press AUX/USB. (See pages 8 and 9.)
The minute digits start flashing on the display. � If you want to correct the hour after pressing SET/ RESUME, press CANCEL. The hour digits start flashing again.
When you press the play button for a particular source (FM/AM, CD 6, and AUX/USB), the unit turns on and the unit starts playing the source if it is ready. � The selected source lamp lights up.
10
|
|
|
> |
|
