JVC MXG50
Manual de Servicio

MX-G50
Removing the CD Tray fitting (1) (See Fig. 4 to 6)
Prior to performing the following procedure, remove the metal cover. 1. Press the POWER button. Press the OPEN/CLOSE button to eject the CD tray. 2. After drawing the lower part of the tray fitting toward the front, remove the five claws a. Then, while moving the tray fitting upward, remove it. 3. Press the OPEN/CLOSE button to insert the tray. Fig.4
POWER button

CD tray

OPEN/CLOSE button

Joint

CD tray fitting

Removing the CD Tray fitting (2) (See Fig. 5 to 7)
- How to eject the CD tray without turning on power 1. Turn the black loading pulley gear marked b from the back of the CD changer unit as shown in Fig.7 and draw the CD tray toward the front. 2. After drawing the lower part of the tray fitting toward the front, remove the five claws a. Then, while moving the tray fitting upward, remove it. 3. Push and insert the CD tray manually.
(See Fig. 24) Claw a

Fig.5

CD tray

This slot of the board. b (Loading pulley gear)

Fig.7

Fig.6

1-6