IP hookup with a VCR and a Digital Video Disc Player (or similar device).
BEGIN
First connect the original cable TV signal or Antenna signal to the ANT IN jack on the back of the VCR. Connect the ANT OUT jack on the rear of the VCR to the ANT IN jack on the rear of the Video Disc Player. Connect the ANT OUT jack on the rear of the Video Disc Player to the ANT �A� input on the rear of the TV. Connect the yellow Video Cable from the VIDEO OUT jack on the VCR to the VIDEO IN jack on the TV (labeled VIDEO IN 1). Then, connect the red and white Audio Cables from the AUDIO OUT jacks on the VCR to the AUDIO IN jacks on the rear of the TV (labeled AUDIO L & R IN 1).
ANTENNA OUT
REAR OF TV
8 +R� �L+
8
5
PIP ANT "B" 75
S-VIDEO VIDEO
SURROUND SOUND
4
ATTENTION - TO AVOID DAMAGE
1. DO NOT CONNECT SURROUND SOUND SPEAKERS TO A SEPARATE AMPLIFIER OR TO SPEAKERS CONNECTED TO ANOTHER PRODUCT. 2. DO NOT CONNECT LEFT AND RIGHT SPEAKER OUTPUT TOGETHER.
3
ANT "A" 75
L AUDIO R/MONO IN-2 IN-1 OUT
VIDEO CABLE (YELLOW)
AUDIO CABLES (RED AND WHITE)
VIDEO CABLE (YELLOW)
OUT
OUT
OUT
OUT ANTENNA OUT
Connect the yellow Video Cable from the VIDEO OUT jack on the Video Disc Player to the VIDEO IN jack on the TV (labeled VIDEO IN 2). Then, connect the red and white Audio Cables from the AUDIO OUT jacks on the VCR to the AUDIO IN jacks on the rear of the TV (labeled AUDIO L & R IN 2).
VIDEO ANTENNA IN IN
L
AUDIO
R
R AUDIO L
VIDEO
ANTENNA IN IN IN IN
DVD (OR SIMILAR)
VCR
2
75 OHM COAXIAL CABLE
Note: When selecting the PIP SOURCE, the VCR will appear on the AV 1 channel, and the Video Disc Player will appear on the AV 2 channel.
