PHILIPS MVR650MG/99
Manual de Usuario

38 Automatic Playback Features
Automatic Playback
When you put a tape in the VCR, the power will come on automatically. If the tape�s record tab is missing, play will begin. (If a timer recording is set, you may have to press POWER to turn on the VCR. Turn off the VCR for the timer recording later. If you insert a tape without a record tab when a timer recording is set, the VCR will eject the tape.)

Automatic Rewind, Eject, Off
When a tape is played, fast forwarded, or recorded to its end, the VCR will rewind the tape to the beginning, eject the tape, and turn itself off. If the real-time counter memory is set, the VCR will only rewind the tape to the point at which the counter is set to zero, then stop.The VCR will not eject the tape or shut itself off.

Tape Eject
A tape can be ejected with the VCR power on or off (but the VCR must be plugged in). If a Timer Recording is programmed, a tape can only be ejected with the power on. Be sure to insert a tape for the Timer Recording, then turn off the VCR power.

Tracking
The VCR automatically adjusts tracking to give you the best possible picture quality during normal play. With some recordings, you may get a better picture using manual tracking. To adjust the tracking manually, press CH on the remote or CHANNEL o/p on the VCR during normal or slow motion play. NOTES: � Tracking returns to automatic tracking adjustment when you insert a tape or stop play. � Use CHANNEL o/p on the VCR or CH on the remote to remove vertical jitter in a Still picture.

Before Tracking Adjustment

After Tracking Adjustment