1
, Open the battery cover.
Slide the cover in the direction of the arrow.
� Be sure to turn off your camera when charging the battery pack (page 15). � Your camera operates only with the �InfoLITHIUM� NP-FM50 battery pack (M series) (supplied) (page 121).
2
Battery eject lever
3
AC Adaptor
, Install the battery pack, then close the battery cover.
Insert the battery pack with the b mark facing toward the battery compartment as illustrated. Make sure the battery pack is firmly inserted all the way, then close the cover.
� The battery pack is easily inserted by pushing the battery eject lever at the front of the battery compartment up.
, Open the DC IN jack cover and connect the AC Adaptor (supplied) to the DC IN jack of your camera.
Connect the DC plug with the v mark facing up.
� Do not short the DC plug of the AC Adaptor with a metallic object, as this may cause malfunction. � Clean the DC plug of the AC Adaptor with a dry cotton bud. Do not use the dirty plug. Use of the dirty plug may not properly charge the battery pack.
