WHIRLPOOL MT4155SPB2
Manual de Usuario

Cooking
To Use:
1. Touch COOK TIME. �STAGE 1 ENTER COOK TIME� will scroll across display. Enter the length of time to cook. If cooking with 100% power, skip Step 2. 2. Touch COOK POWER, then set the desired cooking power. See �Cooking Power.� 3. Touch START. When the cycle ends, �END� will appear in the display, and the end-of-cycle tones will sound, followed by reminder tones. 4. Touch OFF-CANCEL or open the door to clear the display.

Popcorn
Popcorn is a sensor function. The sensor determines the appropriate popping time of commercially packaged microwavable popcorn. � Do not use regular paper bags or glassware.
� �

Pop only 1 package of popcorn at a time. Follow manufacturer�s instructions when using a microwave popcorn popper. Listen for popping to slow to 1 pop every 1 or 2 seconds, then stop the cycle. Do not try to pop unpopped kernels. Use fresh bags of popcorn for optimal results. Cooking results may vary by brand and fat content.

�

� �

Cooking in Stages
The oven can be set to cook at different cooking powers for various lengths of time, up to 3 stages, plus a defrosting stage and a warming stage. Cook settings can be used in any order, except defrosting, which must be the first stage, and Warm Hold, which must be the last stage.

There are 2 popcorn functions: Regular and Snack. Use Regular for bag sizes 3.5 oz (99 g) and 3.0 oz (85 g). Use Snack for sizes 1.75 oz (50 g) and smaller.

To Use POPCORN:
1. Place popcorn bag on the turntable. 2. Touch POPCORN once for Regular, or twice for Snack. Touch START, or wait for the oven to start the popping cycle automatically. When the cycle ends, �END� will appear in the display, and the end-of-cycle tones will sound, followed by reminder tones. 3. Touch OFF-CANCEL or open the door to clear the display and/or stop reminder tones.

To Cook in Stages:
1. Touch COOK TIME. �STAGE 1 ENTER COOK TIME� will scroll across display. Enter the length of time to cook during the 1st stage. 2. Touch COOK POWER, then enter the desired cooking power for the 1st stage. See �Cooking Power.� 3. Repeat steps 1-4 for each additional stage. Warm Hold may be programmed to follow the last stage. 4. Touch START. Two tones will sound between stages. When the cycle ends, �END� will appear in the display, and the end-of-cycle tones will sound, followed by reminder tones. 5. Touch OFF-CANCEL or open the door to clear the display and/or stop reminder tones. Cook time may be added in 30-second increments during the cycling stage by touching JET START� control.

10