|
Usuarios conectados
Actualmente hay 5867 visitantes y 1 usuarios online.
|
Productos
|
Información
|
Destacado
|
|
|
|
|
No hay comentarios de productos.
http://cxema.ru
PITCH � . to move the picture down all input signals received. ZOOM/SMOOTHING for text-based applications.) LANGUAGE V The CONTRAST OSD appears. OPTION CENTER
Getting Customizing Started Your Monitor
For vertical adjustment, select V using �/� 1 Press the MENU button. STANDARD buttons and adjust position using the +/� The MENU OSD appears. Standard effect (factory preset smoothing OK MENU buttons. effect). EXIT + . to move picture up Once the contrast is adjusted, it will be stored in memory for TEXT MENU PHASE To make the characters appear clear. (This mode is suited
Adjusting the Contrast
CENTER
H 1 Press the > (contrast) � button. COLOR GRAPHICS CONTRAST for CD-ROM software such as photo images or
To make the pictures appear clean. (This mode is suited
26 illustrations.)
2 Press the �/� buttons to select ZOOM/SMOOTHING,
26 and press the MENU button again. 1 Press the MENU button. turn off the test pattern.
MENU PHASE
5 When you have finished, click [END] on the screen to The ZOOM/SMOOTHING OSD appears. OK MENU The MENU OSD appears.
48. 4kHz / 60Hz
EXIT MENU
The OSD automatically disappears after about 30 seconds. PITCH
Horizontal Vertical CENTER Frequency* ZOOM/SMOOTHING
To close OSD, press the MENU button twice. ZOOM/SMOOTHING 2 Press the +/� buttons. LANGUAGE SMOOTHING FULL2 +. . for more contrast REAL Once the brightness is adjusted, it will be stored in memory � . for less contrast The ZOOM/SMOOTHING OSD appears. D
COLOR OPTION
Adjusting the Picture Brightness ZOOM FULL1 GB
2 Press the �/� buttons to select ZOOM/SMOOTHING, F
for all input signals received. and press the MENU button again.
1 Press the ¨ (brightness) � button.
ZOOM/SMOOTHING BRIGHTNESS SMOOTHING FULL2 ZOOM/SMOOTHING REAL 26
BRIGHTNESS appears. The OSD automatically disappears after about seconds. 3 Press the �/� buttons to select ZOOM. MENU
ES I signal appear in the CONTRAST OSD. ZOOM FULL1
* The horizontal and vertical frequencies for the received input
1-5
4 Press +/� buttons to select the desired mode.
To close OSD, press the MENU button twice. current input signal.
ZOOM FULL1
Changing the Picture Size
48. 4kHz / 60Hz REAL
SMOOTHING FULL2
According to the Signal
Horizontal Vertical The monitor is set at factory to display picture on the Frequency*
2 Press the +/� buttons. resolution. You can also view the picture at its actual aspect
screen in full, irrespective of picture�s mode or 3 Press the �/� buttons to select SMOOTHING.
ZOOM/SMOOTHING ratio or resolution. Note that 1280 � 1024 resolution signals SMOOTHING TEXT � . for less brightness The OSD automatically disappears after about 30 seconds.
+ . for more brightness ZOOM STANDARD fill the entire screen and ZOOM is not possible. Once zoom is set, it will be stored in memory for the
GRAPHICS
To display picture on the screen in full FULL 1
The OSD automatically disappears after about 3 seconds. The input signal is displayed on screen in full, 4 Press +/� buttons to select the desired mode.
* The horizontal and vertical frequencies for the received input
signal appear in the BRIGHTNESS OSD.
If the picture displayed at FULL 1 or FULL2
Select �FULL 1� in step 4. irrespective of the picture�s mode or resolution. FULL 2 The input signal is displayed on the screen at its actual aspect ratio. Therefore, black bands may appear at the If screen is too bright when using the monitor in a mode is not smooth
dark room top and bottom of picture depending on the signal. Decrease BACKLIGHT (page 15). Use the picture function. The smoothing effect
REAL The OSD automatically disappears after about 30 seconds. becomes stronger in the order of TEXT STANDARD n resolution. (Sub-SXGA signals are displayed at the center GRAPHICS. Note that 1280 � 1024 resolution signals are of the screen surrounded by black frame.) shown only in REAL mode and SMOOTHING is not possible. Once the smoothing is set, it will be stored in memory for the current input signal.
To close OSD, press the MENU button twice. The input signal is displayed on the screen at its actual
12 13
|
|
|
> |
|