PHILIPS MRD120/78
Manual de Usuario

Getting Started
Step 3: Setting the speakers
You can adjust the delay time (centre and rear speakers only) and volume level for individual speakers. These adjustments let you optimise the sound according to your surroundings and setup. Test Tone - Turning on/off If you have turned on the test tone, the test signal will be automatically generated to help you judge the sound level of each speaker. {CNTR DELAY} � Select this to set the delay time in relation to the listening position/distance for the center speaker (5ms, 3ms, 2ms, 1ms or OFF). {REAR DELAY} � Select this to set the delay time in relation to the listening position/distance for rear speakers (15ms, 12ms, 9ms, 6ms, 3ms or OFF).

English
16

5 Press 1 2 to adjust the settings that
best suit your surround sound needs.

6 Press OK to confirm.
Helpful Hint: � Use longer delay time settings when the rear speakers are closer to the listener than the front speakers. Adjusting the speaker output levels You can adjust the rear speakers, centre speaker and subwoofer output levels by comparing the sound from the front speakers.

1 In disc mode, press SYSTEM MENU. 2 Highlight
Move to icon and press 4. and press 2.

� Use the 1 2 3 4 keys on the remote to navigate in the menu.

Move to {TEST TONE} and press 2.

DIGITAL OUT NIGHT MODE CNTR DELAY REAR DELAY

TEST TONE
TEST TONE

OFF ON

3 Press 34 to select a setting.
Adjusting the delay time

4 Press 34 to highlight one of the options
below at a time, then press 2. q Press the respective buttons on the remote (REAR +-, CENTER +and SUBW +-) to adjust the output level between -15dB ~ 10dB.
5ms

DIGITAL OUT NIGHT MODE

CNTR DELAY REAR DELAY
TEST TONE SET CENTER DELAY

OFF

Helpful Hint: � If you have selected Stereo mode, adjusting the center and rear speakers� volume level will have no effect.

TIPS:

To return to the previous menu, press 1. To remove the menu, press SYSTEM MENU.