Protecting a song
You can protect a song to prevent an accidental erasure. The protection can be released whenever you want. To keep a recorded song, we recommend to protect it.
<Note>
You cannot make recording or editing to a protected song. If you want to make recording or editing to a protected song, you must release the protection first.
flashing
5) Use the [CURSOR / ] keys to select "On", and press the [ENTER] key. 1) Load the song you want to protect. 2) While the recorder is stopped, press the [MENU] key to enter the menu mode.
The display shows the menu selection screen, in which "System" is highlighted initially. The current song is now protected. You cannot make any recording or editing with the song. To release the protection, carry out the same procedure above but select "Off" in step 5.
6) Press the [MENU] key to exit the menu mode.
<Tips>
When the protected song is loaded, � � is shown in the upper right corner of the home screen (indicated by the arrow below). When this icon is shown, you cannot make recording or edit the song.
3) Use the [CURSOR ] key to highlight "Song", then press the [ENTER] key.
The display now shows the song edit menu selection screen, in which "Select Song" is highlighted initially.
4) Use the [CURSOR ] key to highlight "Protect", then press the [ENTER] key.
The current option ("On" or "Off") flashes. The default option is "Off".
