WHIRLPOOL MMC5080AAW
Manual de Usuario

MMC5080AA_GB.fm Page 10 Thursday, March 11, 2004 3:13 PM

Operation
Setting Cooking Times & Power Levels
Your microwave allows you to set up to two different stages of cooking, each with its own time length and power level. The power level button lets you control the heating intensity from Warm (1) to High (0).

Using the More/Less Buttons
The More/Less buttons allow you to adjust pre-set cooking times. They only work in the Instant, Time Cook modes. Use the More/Less button only after you have already begun cooking with one of these procedures. The More/Less feature cannot be used with the Sensor Cook button. 1 To ADD more time to an automatic cooking procedure: Press the More(9) button.

One-stage Cooking
For simple one-stage cooking, you only need to set a cooking time. The power level is automatically set to High. If you want to set the power to any other level, you must set it using the Power Level button. 1 Use the number buttons to set a cooking time. You can set a time from one second to 99 minutes, 99 seconds. To set a time over one minute, enter the seconds too. For example, to set 20 minutes, enter 2, 0,

2

To REDUCE the time of an automatic cooking procedure: Press the Less(1) button.
If you wish to increase/decrease in Time Cook mode by 10 sec, press the More(9) or Less(1) button.

0, 0 . 2 If you want to set the power level to something other than High, press the Power Level button, then use the number buttons to enter a power level. Power Levels:
1 = PL:10 2 = PL:20 3 = PL:30 4 = PL:40 5 = PL:50 (Warm) (Low) (Defrost) (Medium Low) (Medium) 6 = PL:60 7 = PL:70 8 = PL:80 9 = PL:90 0 = PL:Hi (Simmer) (Medium High) (Reheat) (Sauté) (High)

Switching the Beeper On/Off
You can switch the beeper off whenever you want.

1 2 3

Press the Sound button. The display shows �ON�.

3

Press the Start button to begin cooking. If you want to change the power level, press Pause/Cancel before you press Start, and reenter all of the instructions.

(�START� will flash) Press the Sound button to turn the volume off. The display shows: �OFF�.(�START� will flash) Press Start. The display returns to the time of day.

Some recipes require different stages of cooking at different temperatures. You can set multiple stages of cooking with your microwave.

Multi-stage Cooking

1

Follow steps 1 and 2 in the �One-Stage Cooking� section on the previous page. When entering more than one cooking stage, the Power Level button must be pressed before the second cooking stage can be entered. To set the power level at High for a stage of cooking, press the Power Level button twice.

2 3 4

Use the number buttons to set a second cooking time. Press the Power Level button, then use the number buttons to set the power level of the second stage of cooking. Press Start to begin cooking.

You can check the Power Level while cooking is in progress by pressing the Power Level button.

10