Too high voltage supplied due to the setting error of transfer voltage. -> Adjust/replace HVPS.
Obstacles stuck on OPC's surface -> Clean the OPC and machine or replace developer. When putting in/out the developer, scratch is made. -> Replace the developer.
D/R in developing unit has the defect. -> Replace the developer.
4-2-11 Trembling at the End When OHP Printing
Recommended OHP film used? YES
NO
Use the recommended film.
Inserted over than 10 films into the MPF? YES
NO
When OHP printing, does the fan temporarily stops and revolves? YES
NO
Use the recommended film.
When multi-page OHP printng, less than 10 films are guranteed. (Reduce the number of films and re-insert after Paper check LED is off)
Other parts are touching the fan and prevents it from revolution. -> Check and repair.
