Timer
The microwave oven controls can be used as a kitchen timer. Use COOK at �0� Cook Power for timing up to 99 minutes, 99 seconds. NOTE: If all tones are removed (see page 6) the
Timer will still function, but the Timer slgnal will not sound.
DO THIS...
THIS HAPPENS...
The COOK Indicator Light will come and the Display will show four 0�s. on
1. Touch COOK.
The Display will show what numbers you touched In the order you touched them. This example shows 1 minute, 45 seconds.
2. Touch Number Pads for the mlnutes and seconds you want.
The COOK POWER Indicator Light will come on and the Display will show �P-HI:�
3.
Touch COOK POWER.
The Display will show �P-01� This tells you that the oven will be operating at
4. Touch �0� Number Pad.
5. Touch START. NOTE: If you hear the fan start when you touch START, you have not set the Cook Power properly. Touch CANCEL and start over.
The COOK Indicator Light will stay on to show that the timer is running. The COOK POWER Indicator Light will be on. The Display counts down to show you how much time is left. During the countdown the oven will be dark and the fan will be off. For 2 of every10 seconds the Display will show �P-O� to tell you that the oven is operating at 0% power. When the set time ends,�End� will show on the Display and 4 beeps will sound. (You can stop the beeping by opening the door or by touching CANCEL.) �End� will remain on the Display and a reminder tone will sound every 60 seconds until the door is opened or CANCEL is touched. The Display will then show the time of day.
