RFP Alert Function
Activating Internal Speaker ON/ OFF
This feature allows you to select whether or not the speaker output is sounded when the �RFP Alert� is triggered. Initially from the factory the speaker output is activated. Toggling between 5, � buttons allows you to deactivate or activate the �Internal Speaker�. If you switch the speaker output OFF, you can not change the �TEST MODE�.
Speaker Volume Output Adjustment
If the �Internal Speaker Output� has been selected then it is possible to adjust the volume of the speaker output for when the Alert is triggered. To adjust the volume you must engage the �TEST MODE�. Note:
� If the �Internal Speaker Output� is turned OFF, then this menu will not appear.
1. Select the �TEST MODE� with the 3 button.
2. Press the 5 button to switch the �TEST MODE� ON.
In this mode the speakers will sound.
3. Decrease or increase the volume with the volume buttons.
Display shows 10 � 30.
4. After setting volume with the � button, cancel the �TEST MODE�, then move to the next selection. 5. Cancel the �TEST MODE� with the 2 button.
6. Press the FUNCTION button to move to the next selection.
