BEFORE USING THE OVEN FOR THE FIRST TIME
When first switching on
When the cooker is first switched on at the wall the timer will flash. Press buttons ( and ) together, while holding them down press (+) button until the correct time of day is reached. To use the timer refer to instructions on page 7.
Rating plate
Record the model, product and serial numbers on the inside back cover of this instruction book from the rating plate. This is situated on the lower front frame of the oven and can be seen upon opening the main oven door. The oven must be protected by a suitably rated fuse or circuit breaker. The rating of the oven is given on the rating plate. The rating plate must not be removed from the oven front frame as this may invalidate the guarantee.
Preparing to use your oven
Clean the ovens with a soft cloth and hot soapy water and wash the grill and oven furniture before use. The grill and ovens should be heated without food to burn off any residue from the elements. To do this, run the ovens at 220°C for 10 - 15 minutes. The procedure should be repeated with the grill for approximately 5 - 10 minutes. During this period an odour may be emitted, it is therefore advisable to open a window for ventilation.
Condensation and Steam
When food is heated it produces steam in the same way as a boiling kettle does. The ovens are vented to allow some of this steam to escape. However, always stand back from the cooker when opening the oven doors to allow any build up of steam or heat to be released. If the steam comes into contact with a cool surface on the outside of the cooker, e.g. a trim, it will condense and produce water droplets. This is quite normal and is not caused by a fault on the cooker. To prevent discolouration occurring, regularly wipe away condensation and any soilage from the cooker surfaces.
Cookware
Baking trays, oven dishes etc., should not be placed directly against the grid covering the fan at the back of the oven. Do not use baking trays larger than 30cm x 35cm (12" x 14") as they will restrict the circulation of heat and may affect performance. Do not place bakeware directly on the second oven base when the oven is on as damage to the oven enamel and bakeware will occur.
