No hay comentarios de productos.
MDR-IF630RK
SECTION 1 GENERAL
This section is extracted from instruction manual.
Setting up the transmitter 1 Connect the transmitter to audio/video
equipment. Select one of the hookups below depending on the jack type: To connect to a headphones jack
3
Adjust the volume.
High
Low
Set the INPUT SOURCE selector to PHONES.
INPUT SOURCE LINE PHONES
Transmitter
Check the remaining power of the headphone batteries Pull up the suspender, and check that the headphones� power indicator lights in red. You can now use the headphones. Charge the batteries or install new batteries, if the power indicator light is weak or turned off and the sound become distorted or has a lot of noise.
B
R AUDIO IN
A
L
DC IN 9V
to AUDIO IN A jacks Right channel (red) Left channel (white)
Connecting cord (supplied) to headphones jack (stereo mini jack)
POWER
Unimatch plug adaptor (supplied) to headphones jack (stereo phone jack) CD Walkman, MD Walkman, WALKMAN*, TV, VCR, etc.
Audio mode switch Depress the audio mode switch (VOICE mode) to emphasize the human voice. Press to release it (NORMAL mode) for normal tone quality.
Audio mode switch
ATT (attenuator) selector If a loud sound is distorted when the transmitter is connected to an audio output jack other than the headphones jack, set the ATT selector on the transmitter to -12 dB. The default setting of the ATT selector is 0 dB.
NORMAL
VOICE
ATT selector
ATT
0dB �12dB
Sony Corporation
9-873-016-11
Audio Entertainment Group
2000L16023-1D Printed in Japan ©2000.12 Published by General Engineering Dept.
�2�
|