SONY MDR7505
Manual de Servicio

MDR-7505

1-3. HUNGER (L)
2 Cushion stopper (upper)

Precaution during installation
Adjust the distance between the slider holder and harness to the specified distance as shown. Slider holder (L side)

4

1 Two screws (+P2 � 6)

0 � 2 mm 5

3 Cushion stopper (lower) (L)

Precaution during installation
4 Claw 5 Slider Route the harness into the groove and the rib of the portion A as shown.

3 Slider cap (L) 7 Harness 9 Slider cap lid (L) A

6 2 Two screws (+P2 � 6) 1 Two screws (+P2 � 6)

Precaution during installation
8 Place the hunger in the direction as shown and route the harness coming from the slider cap lid through the hole of the portion B on the Ginbal.

2 Ginbal (L) Route the harness into the groove inside the portion C.

3 Hunger (L) 1 Ginbal shaft B C

�3�