Precaution during installation
Adjust the distance between the slider holder and harness to the specified distance as shown. Slider holder (L side)
4
1 Two screws (+P2 � 6)
0 � 2 mm 5
3 Cushion stopper (lower) (L)
Precaution during installation
4 Claw 5 Slider Route the harness into the groove and the rib of the portion A as shown.
3 Slider cap (L) 7 Harness 9 Slider cap lid (L) A
6 2 Two screws (+P2 � 6) 1 Two screws (+P2 � 6)
Precaution during installation
8 Place the hunger in the direction as shown and route the harness coming from the slider cap lid through the hole of the portion B on the Ginbal.
2 Ginbal (L) Route the harness into the groove inside the portion C.
