DISASSEMBLY INSTRUCTIONS
1-5: AV PCB/DVD PCB/DECK CD (Refer to Fig. 1-5) 1. Make the short circuit on the position as shown Fig. 1-5 using a soldering. If you remove the Deck CD with no soldering, the Laser may be damaged. 2. Disconnect the following connectors: (CP8001, CP8002 and CP8005). 3. Remove the 4 screws 1. 4. Remove the Deck Angle in the direction of arrow (A). 5. Disconnect the following connectors: (CP2301, CP2302 and CP2601). 6. Remove the 4 screws 2. 7. Remove the Deck CD in the direction of arrow (B). 8. Remove the 4 screws 3. 9. Remove the DVD PCB in the direction of arrow (C). 10. Remove the 3 screws 4. 11. Remove the AV PCB in the direction of arrow (D).
Pick Up PCB
2 2
Deck CD
2
2
Make the sort circuit using a soldering.
3 3 3
DVD PCB
(B)
3
1
(C)
1
1
Deck Angle
1
AV PCB
(A)
4
4 4
(D)
Bottom Plate
Fig. 1-5 NOTE When the installation of the Deck CD, remove all the soldering on the short circuit position after the connection of Pick Up PCB and DVD PCB connector.
