1. Replace the agitator brush if brushes are badly worn. Lay a straight edge across the base supports and rotate the agitator brush dowel. The brushes should extend past the brush supports.
3.4.2.
Agitator Assembly Replacement
1. Remove light cover and light lens, (see Bulb Removal & Replacement). 2. Remove nozzle cover, (see Belt Removal & Replacement). 3. Remove old agitator assembly. 4. Discard the old agitator assembly. 5. Replace new agitator. 6. Replace the nozzle cover, screws and light cover, (see Belt Removal & Replacement).
