POWER CORD/ON-OFF SWITCH REPLACEMENT
A-4 A-22 A-10
A-6
A-7
DUST COMPARTMENT COMPONENT LOCATIONS
A-17
A-24
A-9
A-21 A-25 A-19 A-14 A-28 A-18 A-27
B BLOCK
A-30
A-10
(Fig. 16)
A-11
Removal
1. Remove the dust cover and switch cover to expose the electrical connections of the power cord, on-off switch, and wire cord. 2. Remove the two (2) cord stopper screws (for power cord replacement), the wire connectors, and wire tie, if present.
A-13 A-26
A-15
A-33
A-29
3. Remove the on-off switch, (for on-off switch replacement) by depressing the switch retaining tabs while pushing up out of the dust compartment at the same time. 4. Pull the power cord out of the dust compartment (for power cord replacement). (Continued on next page)
A-16 A-32
