JVC MC-R434U
Manual de Usuario

INSTALLATION �Install the MC-R433U in the CD/DVD Library.
Before starting installation, be sure to turn both the host computer and peripherals off. For information related to the CD/DVD Library, refer to the instruction manual for the CD/DVD Library.

Procedure for Opening the Drive Storage Cover of the CD/DVD Library
ENGLISH

Drive storage section Screw Screw

Procedure for Opening the Door of the CD/DVD Library

Drive storage cover
<With the MC-8100LU>

Drive locking screw mounting hole

Drive storage section

Drive storage cover

Drive storage section
Screw
<With the MC-8100LU>
* The illustration shows the CD/DVD Library with the drive storage cover removed for ease of description.

<With the MC-8200LU>

1.
Drive storage section

Remove the screws from the drive storage cover of the CD/DVD Library. Remove the drive storage cover.

2.

Procedure for Determining the Setup Position for MC-R434U
Drive locking screw mounting hole
Drive No. 6 Drive No. 5

Drive No. 4
<With the MC-8200LU>

Drive No. 4 Drive No. 3 Drive No. 2 Drive No. 1

Drive No. 3 Drive No. 2 Drive No. 1

1. 2. 3. 4.

Select the [DOOR OPEN MODE] on the MENU screen of the CD/DVD Library's LCD. Press and hold the "SELECT" switch for five seconds. Turn off the power of the CD/DVD Library when [THE DOOR CAN BE OPENED] message is displayed on the LCD. Insert the key in the key cylinder located at the center of the door to unlock and open the door.

<MC-8100LU drive storage section> <MC-8200LU drive storage section>

1.

Install the drives to the drive slots No.1 through No.6 (No. 1 through No. 4 in the case of the MC-8100LU) sequentially. It makes the work easy if the drives are installed from the lowest number to the highest.

E