PHILIPS MCM118D/37
Manual de Usuario

CD/MP3 Operation
3
Press ¡1 2� to select a desired track. � The album number will change accordingly as you reach the first track of an album by pressing ¡1 or the last track of an album by pressing 2� . Press 2; to start playback. show the current album number. Supported MP3 disc formats: � ISO9660, Joliet, UDF 1.5 � Maximum title number: 256 (depending on filename length) � Maximum album number: 99 � Supported sampling frequencies: 32 kHz, 44.1 kHz, 48 kHz � Supported Bit-rates: 32~256 (kbps), variable bitrates Notes: � The SHUFFLE and REPEAT functions cannot be used simultaneously. � SHUFFLE play is not available in the programe mode.

Radio Reception
3
Turn TUNING 0 to tune to a station. � Display shows: the frequency of the tuned station. Helpful hints: To improve radio reception: � For FM, extend coil antenna at the back of the unit fully for optimum reception.
OPE

4

� During playback, press once ALBUM 4 3 to

Programming track numbers
Programme in the STOP position to select and store your disc tracks in the desired sequence. If you like, store any track more than once. Up to 20 (10 for MP3 disc) tracks can be stored in the memory.
STANDBY-ON
SOURCE BAND PROG/CLOCK
N / CLO S
E

-

VOLUME

+

TUNING

In the stop position, use the ¡1 2� to select your desired track number. � For MP3, you may press ALBUM 4 3 to select a desired album, then press ¡1 2� to select your desired track.

1

Tuning to radio stations 1 2
Select TUNER source. � TUNER is displayed. Press BAND (TUNER on the remote control) once or more to select your waveband.

2 Different play modes: SHUFFLE and REPEAT
You can select and change the various play modes before or during playback. The REPEAT modes can also be combined with PROGRAMME. SHUFFLE ......... tracks of the entire disc are played in random order REPEAT ALL ... repeats the entire disc/ programme REPEAT ............ plays the current track continuously REPEAT ALB ... repeats all tracks in the current (for MP3 only) album

Press PROGRAM (or PROG/CLOCK on the set) to store. � Display: PROG flashes, and is displayed briefly, then the selected track number (and the selected album number for MP3). Repeat steps 1-2 to select and store all desired tracks. � FULL is displayed if you attempt to programme more than 20 (10 for MP3 disc) tracks. To start playback of your disc programme, press 2;.

3

4

Maintenance
Cleaning the Cabinet � Use a soft cloth slightly moistened with a mild detergent solution. Do not use a solution containing alcohol, spirits, ammonia or abrasives. Cleaning Discs � When a disc becomes dirty, clean it with a cleaning cloth. Wipe the disc from the centre out. � Do not use solvents such as benzene, thinner, commercially available cleaners, or antistatic spray intended for analogue records. Cleaning the disc lens � After prolonged use, dirt or dust may accumulate at the disc lens. To ensure good playback quality, clean the disc lens with Philips CD Lens Cleaner or any commercially available cleaner. Follow the instructions supplied with cleaner.

Reviewing the programme
� Stop playback and press PROGRAM (or PROG/CLOCK on the set) repeatedly. � Display first shows a programme sequence, then the stored track number (and the album number for MP3). � To exit review mode, press�.

1

To select your play mode, press the SHUFF or REPEAT on the remote control before or during playback until the display shows the desired function. Press 2; (on the remote control 2;) to star t playback if in the STOP position. � If you have selected SHUFFLE, playback starts automatically. To return to normal playback, press SHUFF or REPEAT on the remote control until the various SHUFFLE/ REPEAT modes are no longer displayed.

2

Erasing the programme
You can erase the programme by: � � � � pressing 9 once in the STOP mode; pressing 9 twice during playback; opening the CD compar tment; Select another sound source. � PROG disappears from the display.

3

� You can also press 9 to cancel your play mode. 14 15