� This unit is a DVD-ROM drive with a 7x speed capability. It especially designed for the JVC CD-ROM Library or CD/DVD Library. It is not compatible with the MC-7000 series �DVD-RAM Library�. � The MC-D207U cannot be operated separately. � A DVD videodisk playback is not possible with the MC-D207U. ROM Replacement When this drive is mounted in the MC-1200U/1600U or MC-2200U/2600U CD-ROM Library, certain serial numbers may require to replace the ROM. Read the section �ROM REPLACEMENT IN THE CD-ROM LIBRARY� on page 6 for the first time.
ACCESSORIES AND DOCUMENTATION
Accessories
Drive locking screw (M3 with washer) ......................... 2 (including one spare)
INSTALLATION
Please refer to the instruction manual of your Library for more information about the CD-ROM or CD/DVD Library.
1. How to Open the Door of the JVC Library
In order to open the door, please also refer to the section �HOW TO OPEN THE DOOR DURING OPERATION� in the instructions for the JVC CD-ROM or CD/DVD Library. 1. Select the [DOOR OPEN MODE] on the MENU screen of the LCD display section. 2. Press and hold the �SELECT� switch for five seconds. 3. Turn off the power of the JVC Library when the [YOU MAY OPEN THE DOOR] or [THE DOOR CAN BE OPENED] message is displayed on the LCD display section. 4. Insert the key in the key cylinder located at the center of the door and turn it 90 degrees counterclockwise to unlock and open the door. Before you start installing the DVD-ROM Drive, be sure to turn off the power of the host computer, all peripheral devices and the Library.
Drive locking section
Drive locking screw mounting hole
� Figure shows the MC-1200U/E
Drive locking section
Drive locking screw mounting hole � Figure shows the MC-2200U or MC-8200U Drive locking screw mounting hole
Drive locking section � Figure shows the MC-2100U or MC-8100U