24 Recording
Read and follow the steps below to record a TV program.
1 2 3 4 5 6
Place a tape with its record tab intact (see page five) in the TV/VCR. The power will come on. Or, if the tape is already in the TV/VCR, press POWER to turn on the TV/VCR, if necessary. Press SPEED until the desired tape speed appears on the TV/VCR screen. See tape speed details below. Use CH(annel) o/p or the Number buttons to select the channel you want to record. You cannot change channels during recording. Press RECORD once to start recording. The REC(ord) light will glow. If the tape does not have a record tab the TV/VCR will eject the tape. Insert another tape. To pause the recording (for example, during commercials), press PAUSE/STILL. The REC(ord) light will flash. To resume recording, press PAUSE/STILL again or press RECORD. The REC(ord) light will glow. To stop recording, press STOP/w.
6
POWER SLEEP/WAKE UP
1
PLAY REW STOP F.FWD
3
ALT.CH
MENU
DISPLAY
1 4 7
RECORD SPEED
2 5 8 0
RESET
3 6 9
TIME SEARCH
CH.
+100
PAUSE/STILL
MUTE
VOL.
3
4-5
25
Tape Speeds This chart shows the recording/playback time for three types of video cassettes (T160, T120, and T60). There are three playback speeds: SP, LP, and SLP. A tape will play only in the speed in which it was recorded. When recording, you can change the tape speed using the SPEED button. You cannot record in LP speed. The slower the speed, the more programming you can fit on the tape. SLP is the slowest speed. Tape Speed SP(Standard Play) LP(Long Play)
(playback only)
Helpful Hints
� You cannot record one channel while watching another. � Recording options are on pages 25-30. � If you pause a recording for more than five minutes, the TV/VCR will switch to Stop mode automatically to protect the video cassette tape from damage. � You can change the tape speed with the SPEED button while a recording is in progress, but some distortion may appear on the tape.
