|
No hay comentarios de productos.
SECTION 3 DISASSEMBLY
Note : This set can be disassemble according to the following sequence.
Set
Panel (rear) assy
Panel (lid) assy
MD block assy
Main board, complete
Frame
Mode motor block
Note : Follow the disassembly procedure in the numerical order given.
3-1. PANEL (REAR) ASSY
� When installing, position the knobs (V�O�R, MIC SENS) and the switches.
1 screws (B1.7x18) (G), tapping
knob (MIC SENS) knob (V �O �R)
2 screw (B1.7x18) (G), tapping
3 screw (M1.4x5.0), locking
4 panel (rear) assy
switches
3-2. PANEL (LID) ASSY
1 knob (EJECT)
2 CN102
a 5 lever (C holder) assy
b
3 screws (M1.4), toothed lock
6 panel (lid) assy 4 screw
�5�
|
