Connecting Putting into Operation Safety and Installation
10 cm
10 cm
20 cm
5x
20 cm
Krieg am Go
lf
!
ICE ! SERV
r
! ! ! !
Please avoid:
Damage to the set due to electrical storms by disconnecting the mains and aerial cables. Opening of the set and interventions by incompetent persons. Heat build-up, moisture, and penetration of dust and foreing objects into the set. Obstruction of the ventilation slots.
! ! !
Too little distances inside cabinets. Damage to the mains lead. Scratching and rubbing the picture screen. Clean the picture screen only with a moistened and soft cloth. Use clear and clean water only. Magnetic fields (loudspeaker boxes) near the set.
!
AUDIO
R
EURO-AV
R
L
L
L
EURO-AV A1 DECODER A2
H
+ �
r
Connecting the set to the aerial
Connect the aerial cable with the aerial socket � of the TV set. For TV/video recorder operation, connect as shown in the figure. This highly digitalized TV set assures optimum picture and sound quality. Precondition for this is: A properly working aerial system and an aerial connecting cable with high screen factor (85 dB) between the TV set and the aerial socket or the TV set and the video recorder. Avoid cable loops in the proximity of the TV set.
r r
!
Connecting the TV set with the mains Switching the set on/off
Press the
¢ button on the set.
IO
If the set is not to be used for a long period of time (e.g. during the night), switch if off with this button. You will save energy.
