|
Usuarios conectados
Actualmente hay 6043 visitantes online.
|
Productos
|
Información
|
Destacado
|
|
|
|
|
No hay comentarios de productos.
Getting Started
Selecting the colour system that corresponds to your TV In order for a DVD to play on this DVD system, the colour system of the DVD, the TV and the DVD player should match. Before changing the TV system, determine the colour system of your TV. Setting the TV Display Set the aspect ratio of the DVD Player according to the TV you have connected. The format you select must be available on the disc. If it is not, the setting for TV display will not affect the picture during playback.
E n g l i s h
1 In disc mode, press SYSTEM MENU. 2 Press 2 repeatedly to select {VIDEO
SETUP PAGE}.
1 In disc mode, press SYSTEM MENU. 2 Press 2 repeatedly to select {VIDEO
SETUP PAGE}.
3 Press 34 to highlight {TV TYPE}, then
press 2.
3 Press 34 to highlight {TV DISPLAY}, then
press 2.
4 Press 34 to highlight one of the options
below: PAL � Select this if the connected TV has the PAL colour system. It will change the video signal of an NTSC disc and output it to PAL format. NTSC � Select this if the connected TV has the NTSC colour system. It will change the video signal of a PAL disc and output it to NTSC format. MULTI � Select this if the connected TV is compatible with both NTSC and PAL (multi-system). The output format will be in accordance with the video signal of the disc.
4 Press 34 to highlight one of the options
below: 4:3 PAN SCAN � Select this if you have a conventional TV and want both sides of the picture to be trimmed or formatted to fit your TV screen. 4:3 LETTER BOX � Select this if you have a conventional TV. In this case, a wide picture with black bands on the upper and lower portions of the TV screen will be displayed. 16:9 � Select this if you have a widescreen TV.
5 Select a setting and press OK.
� Follow the instructions shown on the TV to confirm the selection (if any). � If a blank/distorted TV screen appears, wait for 15 seconds for auto recovery.
5 Select a setting and press OK.
TIPS:
To return to the previous menu, press 1. To remove the menu, press SYSTEM MENU.
18
001-045-LX85-69-Final 18 24/08/2004, 10:54 AM 3139
115 23231
|
|
|
> |
|