KNOW YOUR GRASS CATCHER
READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE ASSEMBLING OR OPERATING YOUR GRASS CATCHER. Compare the illustrations with the carton contents to familiarize yourself with the parts before starting the assembly. Study the operating instructions and safety precautions thoroughly to insure proper functioning of your Grass Catcher and to prevent injury to yourself and others. Save this manual for future reference.
The operation of any tractor can result in foreign objects thrown into the eyes, which can result in severe eye damage. Always wear safety glasses or eye shields before starting your tractor and while mowing. We recommend a wide vision safety mask for over the spectacles or standard safety glasses.
UNPACKING INSTRUCTIONS
� � Remove all parts and packing materials from carton. Check carton contents against list. Be sure all parts are there. (3) Container Tops (3) Container Bottoms (1) Upper Chute (1) Lower Chute (1) Support Assembly (1) Cover Assembly (2) Shoulder Bolts
TOOLS REQUIRED FOR ASSEMBLY
(1) 9/16" Wrench
SHOULDER BOLTS
CARTON CONTENTS:
SUPPORT ASSEMBLY
PARTS IDENTIFICATION
COVER ASSEMBLY
qu r is pr fre plac g ntaineck baded re co he en less n. C mm G er unrioratio reco a ow tie ly NINe m d de on WARoperat r aged. Use an not wea Do ect to dam subj ked or crac
ta ep is ns . R co operly ently ent em
tainer n lled.Con wher. ce la aine nt
is
DUMP BAG INDICATOR
qu r is pr fre plac g ntaineck baded re co he en Cm le G er unrioss tion. com ra a re ow tie ly NINe m d de on WARoperat r aged. Use an not wea Do ect to dam subj ked or crac ta ep is ns . R co operly ently ent em tainer n lled.Con wher. ce la aine nt is
CHUTE LATCH
tainer n d.Con wher. talle lace aine ep erlyis ns . R t cont tly en op quen em r is pr fre plac aineck bag d re cont he ende Cm le G er unrioss tion. com ra re a ow tie ly IN an . U ARNerater m d de se on W not op wea aged Do ect to dam bj d or su ke crac is
NOTE: When right hand (R.H.) and left hand (L.H.) are mentioned in this manual, it means when you are seated on the tractor, in the operator's position. CAUTION: BEFORE ASSEMBLING GRASS CATCHER TO TRACTOR: � Depress clutch/brake pedal fully and set parking brake. � Place gearshift/motion control lever in "NEUTRAL" position. � Place attachment clutch in "DISENGAGED" position. � Turn ignition key "OFF" and remove key. � Make sure the blade and all moving parts have completely stopped. � Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug. 4
