JVC LS-M1AS
Manual de Usuario

English

Thank you for purchasing a JVC product. Before you begin using it, please read the instructions carefully.

Warnings, Cautions and Others
Warning
Observe the following carefully before installation; otherwise, the speaker may fall over, causing damage or injury. � Do not install the speaker stand on an uneven surface or in a place subject to vibration. � Do not lean against the speaker stand. Especially pay attention to children not to do so. � Fasten all the screws firmly when assembling the speaker stand, and check its tightness afterwards regularly. � Do not install any overweight equipment (over 10 kg) on the speaker stand.

7 Precautions
� For safety use � Do not climb or hang on to the speaker stand. � Attach the speaker firmly to the speaker stand. � For installation � While installing the speaker on the stand, do not drop it from the stand. Pay attention not to damage the speaker cabinet. � To obtain the best bass sound quality, install the speaker stand on the flat floor. � For daily use � Wipe with a dry, soft cloth if the speaker stand should become dirty. If very dirty, wipe with a cloth applied a small amount of water or neutral detergent, then wipe with a dry cloth. � Do not use chemicals such as benzine and thinner for cleaning the speaker stand; otherwise, the speaker stand may deteriorate or its paint may come off.

7 Checking the supplied parts
Check to be sure you have the following supplied parts. The quantity of piece supplied is for one pair of speaker stands. Top plate --------------------- 2 Bottom plate --------------- 2 Leg ------------------------ 2 Leg ------------------------ 4

(thick) Screws ------------------- 6 Screws ------------------- 6 Screws ------------------- 4

(thin) Leg holder ------------------ 6

(Black: M6 x 30 mm)

(Black: M6 x 16 mm)

(Silver: M5 x 28 mm)

If any item is missing, contact your dealer immediately.

2