5. Removal of Power unit
1. Remove the top panel, bottom case and rear jack plate. 2. Unscrew a screw (9) and remove the power rod. 3. Unscrew the 4 screws (10). 4. Disconnect the 2connectors (D) and (E). 5. Remove the power unit.
(12) (11)
(10)
(E)
(11)
(D)
(9)
7. Removal of Main C.B.A. and Digital C.B.A..
1. Remove the top panel, bottom case and rear jack plate. 2. Unscrew the 2screws (13) and remove the DV jack C.B.A.
(10)
DV Jack C.B.A.
6. Removal of Drive unit
1. Remove the top panel, bottom case and front panel. 2. Loosen a screw (9) and remove the power rod. 3. Disconnect the 2 connectors (E) and (F).
(E) (9)
(13)
3. Unscrew the 6 screws (14) and remove the MAIN P.C.Board and DIGITAL P.C.Board.
(14)
(F)
4. Unscrew the 5 screws (11) and (12) with support angle. 5. Peel off the shielding tape. 6. Remove the drive unit while lifting the rear part of it.
(14)
