PANASONIC LQDRM200
Manual de Usuario

Recording and timer recording Cannot record. �You haven�t inserted a disc or the disc you inserted cannot be recorded on. Insert a disc the unit can record onto. �The disc is unformatted. Format the disc so this unit can record on it. [RAM] �The write-protect tab on the cartridge is set to PROTECT. �Some programs have limitations on the number of times they can be recorded (CPRM). �The disc is protected with DISC SETTING. �The disc is full or nearly full. Erase unneeded programs or use another disc. �You cannot record on finalized DVD-R discs. �The guide channels are incorrect. Go to the Channel menu and correct them with �VCR Plusi CH Setting�. �The clock is wrong. Go to the Set Up menu and correct it with Clock settings. �The timer program is incorrect. Correct the program. �The unit is not on timer recording standby. (�F� on the unit�s display is not on.) Press [�, DVD POWER] to turn the unit off and make sure that �F� is on. �Different timer program times overlap. �The clock is wrong. Go to the Set Up menu and correct it with Clock settings. �The disc has run out of space. Use a disc that has enough space to record the program.

Page 10 38 10 14 38 32 � 8 7 26 � � 7 �

VCR Plusr programming does not work properly. Timer recording does not work properly.

The unit switches to standby while making a timer recording. The timer program remains even after recording finishes. Timer recording does not stop even when [�] is pressed. The available recording time doesn�t increase even after erasing recordings on the disc. A part or whole of a recorded program has been lost.

�The timer program remains if set to daily or weekly. �Press [�] and then [ENTER] within 5 seconds to turn �F� off. Recording stops.

25 �

�As this unit is unable to erase data written to DVD-RAM with a computer, the available recording time does not increase. The data will be erased if you reformat the disc. �If the disc is dirty, wipe with the DVD-RAM/PD disc cleaner (optional) before formatting. �Available recording space on the DVD-R does not increase even after erasing previously recorded programming. �If there is a power failure or the plug is disconnected from the household AC outlet while recording or editing, the program may be lost or the disc may become unusable. � We cannot offer any guarantee regarding lost programs or discs. You will have to format the disc or use a new disc.

38 53 � �

Still pictures The contents of the card cannot be read. �The memory card format is not compatible with the unit. � Format using FAT 12 or FAT 16 with other equipment or format the memory card with this unit. �The unit tried to display still picture files that were in a folder level that is not compatible. �The still picture file is not JPEG or TIFF. � This unit displays still pictures (JPEG and TIFF) that are in accordance with DCF standard. �Turn off and then turn on the unit again. �When there are a lot of folders and files, it may sometimes take a few hours. �When repeating copying or erasing, it may sometimes take a long time. Format the disc or memory card. �The tray cannot be opened or closed while the still pictures are played back and editing screen is being displayed. Press [RETURN] a few times to clear the screen. �Make sure the PC card is slotted home firmly before attempting to remove.

36 11 11 � � 36, 38 � 18

Copying, erasing and setting protection takes a long time. The tray won�t open/close. The PC card cannot be removed.

Discs make sounds as they rotate. This does not indicate a malfunction.

Maintenance
The precision parts in this unit are readily affected by the environment, especially temperature, humidity, and dust. Cigarette smoke also can cause malfunction or breakdown. To clean this unit, wipe with a soft, dry cloth. �Never use alcohol, paint thinner or benzine to clean this unit. �Before using chemically treated cloth, read the instructions that came with the cloth carefully. Observe the following points to ensure continued listening and viewing pleasure. Dust and dirt may adhere to the unit�s lens over time, making it impossible to record or play discs. Use the DVD-RAM/PD lens cleaner (LF-K123LCA1) about once every year, depending on frequency of use and the operating environment. Read the lens cleaner�s instructions carefully before use.

57
RQT7237

Reference