When you are unable to remove a load from the dryer as soon as it stops, wrinkles can form. The FINISH GUARD option tumbles the load without heat every few minutes up to 45 minutes after the cycle ends. This tumbling rearranges and fluffs the load to avoid wrinkles. On some models you can turn the FINISH GUARD option on or off. You do not have to set the Cycle Control Knob for the FINISH GUARD option. If you do not open the dryer door within a few minutes after the cycle stops, the FINISH GUARD option takes over to protect the load. A signal sounds every few minutes when FINISH GUARD is running. The signal and cycle stop when you open the dryer door. Timed Drying Cycle Use the Timed Drying cycle to complete drying if some items are damp after Automatic drying. Timed drying is also useful for: l Delicate items and small loads that need a short drying time. l Bulky items and large loads that require a long drying time. Heavy
(on some
Damp Dry Feature Use Damp Dry to dry items to damp level or to dry items that do not require an entire drying cycle. Two examples are heavy cottons, such as jeans, which you do not want to become stiff, or cotton clothes which are easier to press when damp. TUMBLE PRESS@ Feature The TUMBLE PRESS feature removes wrinkles from clothes that have been packed in a suitcase or closet, or from items not removed from the dryer at the end of a cycle. As soon as the dryer stops, fold or put the items on hangers. Fluff Air Cycle The Fluff Air cvcle has no heat. Use this unheated cycle to fluff or air dry bedding, plastic tablecloths, foam pillows, sneakers, etc. See page 11 for more information about the Fluff Air cycle.
Dry Feature
models)
Use Heavy Dry and a high heat setting to dry large items or items that are thicker or heavier than a regular load (such as heavy cotton bath sheets or robes).