SONY LDID100B
Manual de Servicio

Adjusting the sound and picture (continued)

1

Press MENU.
The menu display appears on the screen.
PC mode
MENU EXIT AVLS : OFF MEGA BASS : 0 POWER SAVE : OFF V CENT H CENT TRACKING SYNC PRESET SEL EXEC MENU EXIT

AVLS (Auto Volume Limiter System)
Turn the jog dial to set to ON, then press the jog dial.

POWER SAVE

Turn the jog dial to set to ON, then press the jog dial.

AVLS :

ON OFF

POWER SAVE : ON OFF

MENU

SEL

EXEC

VIDEO mode (S VIDEO)
MENU EXIT AVLS : OFF MEGA BASS : 0 POWER SAVE : OFF CONTRAST HUE COLOR RESET SEL EXEC MENU EXIT
SEL EXEC

When you take off the display unit while the POWER SAVE is set to ON, When AVLS is on, the volume does not become louder than the level you set even if you turn the VOL control. the POWER SAVING SENSOR (page 7) is activated and automatically turns off the picture and sound. The picture and sound resume a few seconds after putting the display unit back on. When POWER SAVE is set to ON, you can monitor the status of the Personal LCD Display by checking the POWER/POWER SAVING indicator.

MEGA BASS

2

Turn the PUSH DISPLAY jog dial to select the desired item, then press the jog dial.
The setting screen of the selected item appears.

Turn the jog dial to select the desired value, then press the jog dial.
2: Maximizethe bass sound. 1: Boost the bass sound. 0: Normal bass sound.

Status

MEGA BASS :

2 1 0

POWER/ Picture POWER SAVING indicator Lit in green Lit in orange Normal No picture

Power consumption

Operations

Normal Power save mode

100% 5%

PUSH DISPLAY
SEL EXEC

3 4

Adjust the setting using the jog dial.
For details on each item, see pages 26 to 28. To set other items, repeat steps 2 and 3. Note
The power saving function of the Personal LCD Display works independently from the power management function of your PC.

Press MENU.
The menu display goes off. You can also turn off the menu display by selecting EXIT in the menu using the jog dial.

continued

25-US

26-US

Adjusting the sound and picture (continued)

Adjusting the RGB signal
Note
When you display the picture on both the LCD display of the notebook PC and on the Personal LCD Display, depending on the notebook PC, you may not be able to adjust the picture on the Personal LCD Display due to the mismatch of the output signal frequencies. In this case, change the display mode on your PC to the external monitor only. Then, change the screen resolution according to the list on �Signal compatibility�(page 23).

Adjusting the video signal
CONTRAST
Turn the jog dial to adjust the contrast, then press the jog dial.

Resetting the adjustments to the factory preset level
All settings except AVLS, MEGA BASS, and POWER SAVE settings are reset to the factory preset level.

V CENT
Turn the jog dial to adjust the center of the picture, then press the jog dial.

TRACKING
Turn the jog dial until the stripeson the picture disappear,then press the jog dial.
CONTRAST
ADJ EXEC

Turn the jog dial to select PRESET or RESET in the menu, then press the jog dial.
PC mode
MENU EXIT AVLS : OFF MEGA BASS : 0 POWER SAVE : OFF V CENT H CENT TRACKING SYNC PRESET SEL EXEC MENU EXIT

less

more

COLOR
V CENT ADJ EXEC TRACKING

ADJ

EXEC

Turn the jog dial to adjust the color intensity, then press the jog dial.

VIDEO mode (S VIDEO)
MENU EXIT AVLS : OFF MEGA BASS : 0 POWER SAVE : OFF CONTRAST HUE COLOR RESET

H CENT
Turn the jog dial to adjust the center of the picture, then press the jog dial.

SYNC
Turn the jog dial to adjust the clearance of the picture, then press the jog dial.

COLOR
ADJ EXEC

SEL

EXEC MENU EXIT

less

more

Note

HUE
H CENT ADJ EXEC SYNC ADJ EXEC

The settings are retained even when you turn off the power.

Turn the jog dial to adjust the hue, then press the jog dial.

HUE
ADJ EXEC

continued

reddish

greenish

27

28

-US

1-13